Cubic Yard Calculator: From Tape Measure to Tons
A cubic yard calculator turns tape measurements into the yardage a job takes. Type your measurements and pick any shape for the cubic yards as you type; pick a material too for tons and bags.
More options No waste · exact · reference price
10' 6" is 10.5 ft. Sloped ground?
Enter length, width and depth to see the cubic yards to order.
1.11 cubic yards
rounded up to the nearest ¼ yd³
- Weight
- 1.42–1.58 tons (dry, loose)
- Bags
- 60 bags of 50 lb (0.5 cu ft each)
- Volume
- 30 ft³ · 0.85 m³
- Covers
- 120 ft² at 3 in (1 yd³ covers 108 ft²)
- Source
- Caterpillar, Vulcan Materials
How to calculate cubic yards
To calculate cubic yards, multiply length by width in feet, multiply by depth in inches, then divide by 12 and by 27. That is the cubic yard formula, worked below for a 20 × 4 ft path 3 inches deep.
L × W × Din ÷ 12 ÷ 27 = yd³
- Area20 ft × 4 ft80 ft²
- Depth3 in ÷ 120.25 ft
- Volume80 ft² × 0.25 ft20 ft³
- Cubic yards20 ft³ ÷ 270.74 yd³
Dividing by 12 turns inches into feet. Dividing by 27 turns cubic feet into cubic yards, because one cubic yard is a cube 3 ft × 3 ft × 3 ft, which holds 27 cubic feet. More on how many cubic feet in a cubic yard and what is a cubic yard. The cubic yards calculator above runs these steps for you, for any shape.
Circles, odd beds, steps and sloped ground
The calculator measures 9 shapes. Pick the one that matches the job and enter what the table lists; each shape becomes cubic feet, then ÷ 27.
| Shape | You enter | Typical job |
|---|---|---|
| Rectangle | length, width, depth | slabs, paths, beds |
| Triangle | base, height, depth | corner beds |
| Round or ring | outer and inner diameter, depth | round beds, tree rings |
| Irregular | length and the widths along it | curved beds |
| Known area | sq ft, sq yd, m² or acres | when the area is on a plan |
| Post hole | diameter (in), depth, count | fence and deck posts |
| Steps | width, rise, run, number of steps | solid concrete steps |
| Border | length, width, border width, depth | edging around a patio or lawn |
| Pile | base diameter, height | a pile already on the ground |
Uneven depth: type a range such as 2-6 and the calculator uses the average, 4 inches. Lengths work as you measure them, and the calculator converts the units: 10' 6", 10 1/2 and 10.5 all read as 10.5 ft. Every formula is on the methodology and sources page.
Coverage per cubic yard for common jobs
One cubic yard covers 324 ft² at 1 inch deep, and half as much each time the depth doubles: ft² = 324 ÷ depth in inches.
| Depth | ft² per yd³ | Typical jobs at this depth |
|---|---|---|
| 1 in | 324 | mulch around seedlings (UF/IFAS) |
| 2 in | 162 | mulch beds, low end (2–3 in); garden soil spread 2–3 in (Miracle-Gro) |
| 3 in | 108 | mulch beds (2–3 in); top-dressing a lawn, up to 3 in (Clemson); gravel road surface, 3 in minimum (FHWA) |
| 4 in | 81 | concrete slabs and walks (Sakrete); topsoil for a new lawn, 4–6 in (Penn State) |
| 6 in | 54 | concrete where a walk crosses a driveway, 6 in (NYSDOT); one-layer gravel pad, 6 in (NRCS) |
| 12 in | 27 | vegetable raised beds, 12–18 in (Texas A&M) |
Tons per cubic yard
Tons equal cubic yards × the material's pounds per cubic yard ÷ 2000. One cubic yard weighs from 0.23 tons (mulch) to 2.03 tons (concrete).
yd³ × lb per yd³ ÷ 2000 = tons
Example: 3 yd³ of gravel × 2,550–2,850 lb ÷ 2000 = 3.83–4.28 tons. For tons to yards, divide instead. The weight of all 17 materials, both ways, is on cubic yards to tons.
Bags per cubic yard
One cubic yard fills 27 ÷ the cubic feet on the bag: 54 bags of 0.5 cu ft or 13.5 bags of 2 cu ft. Count by the cubic feet printed on the bag, not the pounds.
| Bag size | Bags per yd³ |
|---|---|
| 0.3 cu ft | 90 |
| 0.375 cu ft | 72 |
| 0.45 cu ft | 60 |
| 0.5 cu ft | 54 |
| 0.6 cu ft | 45 |
| 0.75 cu ft | 36 |
| 1 cu ft | 27 |
| 1.5 cu ft | 18 |
| 2 cu ft | 13.5 |
| 3 cu ft | 9 |
Round up to whole bags. Pick a material in the calculator to see the bag sizes it is sold in.
Wheelbarrow loads per cubic yard
A cubic yard takes 5 loads of a 6 cu ft wheelbarrow: 27 ÷ 6, rounded up.
| Wheelbarrow | Loads per yd³ |
|---|---|
| 4 cu ft | 7 |
| 5 cu ft | 6 |
| 6 cu ft | 5 |
| 8 cu ft | 4 |
Heavy material fills the weight rating first: a full 6 cu ft load of fresh concrete weighs 840–900 lb, while Gorilla rates its 8 cu ft cart at 600 lb. Load concrete, gravel and sand partway. Ratings: Gorilla GCR-4 and GCY-80 (sources).